 |
DIN43650A (18mm)
2 Poles & Ground / 3 Poles & Ground
This was the first DIN43650 connector and still the most popular especially for Hydraulic applications. This version is available with 2 "U" shaped pins and 1 flat ground pin (usually used for solenoid applications) or 3 "U" shaped pins and 1 flat ground pin (usually used for filter switches, pressure switches or sensors). |
 |
Industrial Form B (11mm)
2 Poles & Ground
This is a rectangular shaped connector with three flat pins. It is commonly used for Pneumatic applications. |
 |
DIN43650B (10mm)
2 Poles & Ground
This rectangular connector has 2 "U" shaped pins (pointing out) and 1 flat ground pin. This connector is not very popular. |
 |
DIN43650C (8mm)
2 Poles & Ground / 3 Poles & Ground
This is a smaller square connector with 2 flat pins and one slightly larger flat pin. This is very similiar to the other connector listed below. In general manufacturers coming from
Germany tend to prefer this connector, but the safest way to tell is to measure the distance between pin 1 and pin 2. |
 |
Micro Mini C (9.4mm)
2 Poles & Ground / 3 Poles & Ground
This is a smaller square connector with 2 flat pins and one slightly larger flat pin. This is very similiar to the other connector listed above. In general, manufacturers coming from
Japan or France tend to prefer this connector, but the safest way to tell is to measure the distance between pin 1 and pin 2. |
|
|
