 |
DIN43650A (18mm)
2 Poles & Ground
This was the first DIN43650 connector and still the most popular especially for Hydraulic applications. This version is usually used for solenoid valve applications. It has 2 "U" shaped pins and 1 flat ground pins which are jumped to allow the connector to be mounted so the cable exits from the bottom (ground down or 6:00) or the top (ground up or 12:00). |
 |
DIN43650A (18mm)
3 Pole & Ground
This version has 3 "U" shaped pins and 1 flat ground pin. These are generally used with filter switches, pressure switches or other sensing devices. |
 |
Industrial Form B (11mm)
Ground Down (6:00)
2 Pole & Ground
This is a rectangular shaped connector with three flat pins. It is commonly used for Pneumatic applications. You must specify the ground pin orientation, so that the cable exits from the side that you need. |
 |
Industrial Form B (11mm)
Ground Up (12:00)
2 Pole & Ground
This is a rectangular shaped connector with three flat pins. It is commonly used for Pneumatic applications. You must specify the ground pin orientation, so that the cable exits from the side that you need. |
 |
DIN43650C (8mm)
2 Pole & Ground
This is a smaller square connector with 2 flat pins and one slightly larger flat pin. This is very similiar to the other connector listed below. In general manufacturers coming from
Germany tend to prefer this connector, but the safest way to tell is to measure the distance between pin 1 and pin 2. |
|
DIN43650C (8mm)
3 Pole & Ground
This version has 3 flat shaped pins and 1 larger flat ground pin. These are generally used with filter switches, pressure switches or other sensing devices. |
 |
Micro Mini C (9.4mm)
2 Pole & Ground
This is a smaller square connector with 2 flat pins and one slightly larger flat pin. This is very similiar to the other connector listed above. In general, manufacturers coming from
Japan or France tend to prefer this connector, but the safest way to tell is to measure the distance between pin 1 and pin 2. |
|
Micro Mini C (9.4mm)
3 Pole & Ground
This version has 3 flat shaped pins and 1 larger flat ground pin. These are generally used with filter switches, pressure switches or other sensing devices. |
|
|
